Product details
Overview
Country of origin: Qingdao, China (Mainland)
Brand name: Northsnow
Temperature range: -18~-22
Compressor: single compressor
Certification: CE
Evaporator: copper tuber
Light: LED light
Color: customized
Controller: digital temp controller and machine temp controller
Glass door: low-e toughened glass
Application: for frozen food or ice cream
Model |
Temperature range |
Rated voltage |
Power |
Capacity （L） |
Dimension |
Refrigerant |
BD-SP400 |
-18～-22 |
220V/50HZ |
270 |
300 |
1140*630*840 |
R134a/R600a |
Also can be made by customized | ||||||
The features of Top open single door freezer for ice cream with single compressor:
●The designed of freezer is simple and elegant
●Single or double top doors easy to use
●High efficiency compressor makes cooling effect strong
●Mechanical temperature controller is more accurate
FQA；
1. What’s different between the direct cooling and air-cooling?
Direct Cooling also known as air conditioning natural convection. In the refrigeration system there is an evaporator, the size of the evaporator according to the size of the product and temperature requirements to carry out reasonable ratio. Cooling methods are cooled by natural convection in the air.
Air-Cooling: The product is equipped with a one-piece evaporator and a set of duct cycle components. The evaporator in the box to form up and down circulation, thus achieving the purpose of refrigeration, will cool the fan motor. Because of the cold air blowing, it does not result in the absorption of water from stored foods and frosting. Therefore, the air-cooled style is called frost-free, in fact, no frost is just the surface of the inner wall without frost, evaporator surface still frosting, but do not need artificial defrost it can be automatically defrost.
2. What is power supply?
Standard power supply is 220v/50Hz, it can be transformed to fit for different voltage.
3. What is the material of our freezer?
Freezers are made by automatic foaming machine, high-density polyurethane foam layer, high quality with good thermal insulation effect. The body of freezer used thick stainless steel plate, anti-fog glass, PVC seal ring, mechanical or electronic temperature controller and steel tube.
4. What it takes maintain freezer and keep it running?
A, When the customer received the product please static for 24 hours, because the Freezers in the long-distance transport process may be the coolant flow back, if the immediate use of electricity will easily cause machine failure! So it takes 24 hours to sit still.
B, Freezers are cleaned at least once a month. Take all the food out of the fridge, turn off the Freezer, scrub the freezer with a clean towel, including the seal on the freezer door, because the bacteria on the seal bar are the most, and open the freezer door for 30 minutes.
C, Do not use disinfectants or chemicals to clean freezers because they are corrosive and damage the freezer.
D, The exhaust vents and evaporators of freezer should be wiped regularly, in order to prevent dust clogging and thus affect the cooling effect.
5. How to use the freezer to compare power saving?
A, Do not put hot food in the freezer
B, Do not fill the freezer with too much food. The storage space utilization rate of freezer is 80% for the best, which is good for food storage and energy saving.
6. What issues should be noted in the process of handling?
A. The freezer is not allowed to invert, transverse, squeeze and vibrate.
B. The bottom must be lifted when handling, and the tilt angle shall not be less than 45 °.
C. The screw of the freezer is forbidden to unscrew, otherwise it will affect the effect of freezer.
7. Where should the refrigerator be？
A. The refrigerator should be in a well-ventilated position.
B. Keep the refrigerator away from heat and direct sunlight.
C. The refrigerator should be placed on a flat, solid ground, and should be adjusted to a distance of 30CM from the wall, which is intended to heat the condenser.
http://www.northsnow-refrigeration-equipment.com/
